background image

 06WARNING: Do not direct the nozzle 

toward mechanical parts containing 

lubricant grease, as the grease will dissolve 

and spread over the surrounding ground. 

Vehicle tyres/tyre valves may only be 

cleaned from a minimum distance of 30 cm, 

otherwise the vehicle tyre/tyre valve could 

be damaged by the high-pressure jet. The 

first indication of this is a discoloration of the 

tyre. Damaged vehicle tyres/tyre valves can 

be deadly dangerous.

 

07WARNING: High pressure 

jets can be dangerous if subject 

to misuse. The jet must not be 

directed at persons,animal, live electrical 

equipment or the machine itself.

 08WARNING: High pressure hoses, fittings 

and couplings are important for the safety 

of the machine. Use only hoses, fittings 

and couplings recommended by the 

manufacturer. (it is extremely important 

to protect these components against 

damage by avoiding their improper use and 

protecting them against bending, knocks 

and scratches).

 11WARNING: Switch the appliance off 

completely (master switch on (0)OFF) 

whenever it is left unattended.

 12WARNING:  Every machine is tested in its 

operating conditions, so it is normal for a few 

drops of water to be left inside it.

 13WARNING: Take care not damage the 

electric cable. If the supply cord is damaged, 

it must be replaced by the manufacturer, its 

service agent or similarly qualified persons in 

order to avoid a hazard

 14WARNING: Appliance with fluid under 

pressure. Keep a firm hold on the gun and be 

prepared to take the kickback pressure. Only 

use the high pressure nozzle provided with 

the appliance.

 16WARNING: This appliance is not intended 

for use by persons (including children) 

with reduced physical, sensory or mental 

capabilities, or lack of experience and 

knowledge, unless they have been given 

supervision or instruction concerning use 

of the appliance by a person responsible for 

their safety.

 17WARNING: Children should be supervised 

to ensure that they do not play with the 

appliance.

 18WARNING:  Never start this appliance 

without first completely unwinding the 

high-pressure hose.

 19WARNING: When winding and unwinding 

the pipe take care not to cause this appliance 

to overturn.

 20WARNING: Before unwinding or winding 

the hose, switch the machine off and release 

the pressure in the hose itself (switching 

off).

 21WARNING:  Risk of explosion — Do not 

spray flammable liquids.

 22WARNING: 

To ensure machine 

safety, use only original spare parts from 

the manufacturer or approved by the 

manufacturer.

 23WARNING: Do not direct the jet against 

yourself or others in order to clean clothes or 

foot-wear.

• 

24WARNING: High pressure cleaners 

shall not be used by children or untrained 

personnel.

 WARNING: Water that has flown through 

backflow preventers is considered to be 

non-potable.

• 

XX WARNING: the machine shall be 

disconnected from its power source, by 

removing the plug from the socket-outlet, 

during cleaning or maintenance and when 

replacing spare parts 

• 

XJ WARNING: If an extension cord is used, 

the plug and socket must be of watertight 

construction.

• 

XY WARNING: Inadequate extension cords 

can be dangerous.

WARNING:  It is absolutely forbidden to 

use the machine in potentially explosive 

environments or areas.

 WARNING:

-  NEVER EVER TOUCH THE MACHINE WITH WET 

HANDS OR BARE FEET.

-  NEVER PULL THE POWER SUPPLY CABLE OR 

MACHINE IN ORDER TO DISCONNECT THE PLUG 

FROM THE SOCKET.

-  IF  DURING  FUNCTIONING  THE  POWER SUPPLY 

RUNS OUT, FOR SAFETY REASONS, TURN THE 

MACHINE OFF.

• 

K1 

All the maintenance and adjustment acti-

vities described in this handbook must be carried 

out only after stopping the machine (main switch 

turned to off) and disconnecting the power cord, 

EN

14

Summary of Contents for 8.455.0001

























Reviews: