
EN
18
- If an extension lead is used, the plug and
socket must be watertight and the cable
must have the dimensions shown in the
table below.
JGmUUFE
PLEASE NOTE:
This water cleaner is equipped
with the A.S.S. (Automatic Stop System), which
stops the machine during the bypass phase. To
start the water cleaner, it is therefore necessary
to set the switch on position “ON”; after that
press the pistol trigger: the Automatic Stop
System will start the machine and will stop it
automatically when the trigger is released. It is
advisable to put on the safety of the pistol trig-
ger whenever the machine is stopped, in order
to avoid unintentional starting.
t "OZ BVUPNBUJD TUBSU PG UIF NBDIJOF XJUI
-
PVUQSFTTJOHUIFHVOUSJHHFSJTBUUSJCVUBCMF
UPBJSCVCCMFTJOUIFXBUFSPSPUIFSTJNJMBS
QIFOPNFOB XIJDI EP OPU JNQMZ UIF FYJTU
-
FODFPGBOZEFGFDUTJOUIFNBDIJOF
t %P OPU MFBWF UIF BQQMJBODF VOBUUFOEFE
EVSJOHUIFTUBOECZGPSNPSFUIBONJOVUFT
$POUSBSJMZGPSUIFTBGFUZPGUIFBQQMJBODFJU
JT OFDFTTBSZ UP SFUVSO UIF TXJUDI JOUP UIF
OFF position.
t1MFBTFDIFDLUIBUUIFDPVQMJOHPGUIFIJHI
QSFTTVSFIPTFXJUIUIFBQQMJBODFBOEUIFHVO
TVQQMJFEBTTUBOEBSEFRVJQNFOUTNBEFDPS
-
SFDUMZUIBUJTUPTBZXJUIPVUBOZXBUFSMFBL
*GUIFBQQMJBODFJTFRVJQQFEXJUIBQSFTTVSF
SFHVMBUPS
t XIFO UIF QSFTTVSF JT TFU UP NJOJNVN UIF
"44NBZOPUUSJHHFS5IFSFGPSFEPOPUBM
-
MPXUIFBQQMJBODFUPGVODUJPOJOCZQBTTGPS
NPSFUIBONJOVUF
tEPOPUBDUPOUIFHVOMFWFSUPPGSFRVFOUMZ
UIJTNBZDBVTFBNBMGVODUJPO
> SUITABLE USE OF THE MACHINE
The performances of the machine are suitable
for a professional use. Structural technologies
have been studied to assure high reliability and
safety levels, and long life. It is absolutely for-
bidden to use the machine in potentially explo-
sive environments or areas.
The working temperature must range between
+ 5° and + 50°C. It is forbidden to carry out any
modification to the structure and to any ele-
ments of the machine.
CORRECT USE OF THE MACHINE
t 5IFDMFBOFSNVTUCFQMBDFEPOBmSNTUBCMF
surface and must be horizontal.
t *ODBTFPGPQFSBUJPOJOEPPSTBEFRVBUFWFOUJ
-
lation and gas venting must be assured.
t 8IFOFWFS VTJOH UIF IJHIQSFTTVSF DMFBOFS
users are urged to hold the gun in the correct
position, with one hand on the grip and the
other on the spray rod.
t 5IF XBUFS KFU NVTU OFWFS CF QPJOUFE BU UIF
electrical cables or at the machine.
> UNPACKING
Take out the upper and the lower hooks, which
fix the cardboard box to the pallet, take the card-
board box off, put two wheels of the machine
on ground and take the pallet off (see ref. 2).
> INSTALLATION AND START-UP
1
ST
START-UP
When starting up for the first time or after a
long period out of use, connect the intake line
only for a few minutes so that any dirt is vented
from the delivery outlet.
ELECTRICAL CONNECTION (Ref. 3)
Check that the mains voltage is the same as
that of your machine, indicated on the techni-
cal data plate. Your electrical system must be
constructed by qualified technicians capable of
working in accordance with the requirements
of the regulations in force (earth connection,
230-240V
400-415V
3G 2,5 mm
2
4G 2,5 mm
2
max 20 m
max 30 m