In case you find packing elements on the product, remove them before installation and inspect the
product for external defects (in case physical defects are determined, installation of the product is
prohibited). During bathtub installation, please follow the precautions usually taken during sanitary and
mechanical assembly work.
Connection of faucet (mixer for the bathtub or shower system) must be carried out using filters preventing
the ingress of mechanical impurities with water inside the product.
To ensure the pressure reduction in the water supply network (in order to avoid any damage to the
product due to the pressure drop), the pressure reducer (user-supplied) shall be installed.
It is recommended to use sealants for hygienic convenience and in order to prevent ingress of moisture
under the bathtub. Auxiliary materials (silicone, sealants, etc.) and mounting tools are outside the scope
of supply and available separately.
Possible complete set options:
— acrylic bathtub;
— set of legs with mounting kit (available for additional cost);
— metal frame with mounting kit (available for additional cost);
— front panel (available for additional cost);
— side panel (available for additional cost);
— warranty card;
— instructions for mounting and use of acrylic bathtub.
Mounting instructions
These instructions have been developed for Customers from the Russian Federation, the Republic of
Belarus and the Republic of Kazakhstan. In the event the state adopts technical regulations governing
sanitary and technical works for bathtub installation, as well as preparatory works, then both the given
instructions and relevant provisions of technical regulations shall be followed.
Prior to bathtub installation, it is necessary to ensure complete and qualitative performance of all the
preparatory works (surface leveling, water supply, sewerage system operability, etc.).
4
Lavinia Boho
