Superabrasive
Owner’s Manual Original Language – Lavina
®
LA2000-230
01/2019
2
1.WARRANTY AND RETURNS
WARRANTY POLICY FOR THE L
AVINA® LA2000-230
Superabrasive Ltd. guarantees that the original purchaser of the Lavina® machine will be covered against defects in
material and workmanship for a period of 2 years from the date of delivery or 600 hours of use whichever comes first.
The following conditions pertain to this warranty:
•
Applies only to the original owner and it is not transferable.
•
Machine must not be dismantled and tampered with in any way.
•
Covered components proven defective will be repaired or replaced at no charge. Covered components include
motors, bearings and switches.
•
This warranty does not apply to any repair arising from misuse, neglect or abuse, or to repair of proprietary
parts.
•
This warranty does not apply to products with aftermarket alterations, changes, or modifications.
•
This warranty is in lieu of and excludes every condition of warranty not herein expressly set out and all liability
for any form of consequential loss or damage is hereby expressly excluded.
•
This warranty is limited to repair or replacement of covered components and reasonable labor expenses.
•
All warranty returns must be shipped freight prepaid.
The above warranty conditions may be changed only by Superabrasive. Superabrasive reserves the right to inspect and
make a final decision on any machine returned under this warranty. This warranty applies to new, used and demo
machines.
Superabrasive does not authorize any person or representative to make any other warranty or to assume for us any
liability in connection with the sale and operation of our products
RETURN POLICY FOR LA
VINA® LA2000-230
The Lavina® machines may be returned, subject to the following terms:
In no case, a machine is to be returned to Superabrasive Ltd. for credit or repair without prior authorization. Please
contact Superabrasive Ltd. or your local distributor for an authorization and issuance of a return authorization number.
This number along with the serial number of the machine must be included on all packages and correspondence.
Machines returned without prior authorization will remain property of the sender and Superabrasive Ltd. will not be
responsible for these.
2. DISPOSAL
If your machine after time is not usable or needs to be replaced, send the machine back to Superabrasive or a local
distributor, where a professional disposal complying with the environment laws and directives is guaranteed.
3.MANUFACTURER’S CONTACTS
If you need to contact Superabrasive Ltd. with technical support questions, below is the contact information.
Address:
Superabrasive Ltd.
Rabotnicheska 2A
BG-6140 Krun
Bulgaria
Email:
Tel.:
+359 431 6 44 77
Fax:
+359 431 6 44 66
Website: