Superabrasive User Manual Original Language
Lavina
® 21-X
4/2015
9
PREPARING THE MACHINE FOR TRANSPORTATION
Unplug the motor cable plug from the control box (Fig. 3.7) and disconnect the water hose from the main head by
pulling it out (Fig. 3.8). Wind the electrical cable on the carriage. Release the pin sets (Fig. 3.9) which attach the head to
the carriage.
Pull out the vacuum hoses, and dismount the head from the carriage (Fig. 3.10) (Fig. 3.11).
The head of the
Lavina®21-X has two handles intended for easy moving and transportation (Fig. 3.11, Fig. 3.12). The
LAVINA® X machine is engineered with easy transportation in mind.
STORAGE
Always store and transport the LAVINA® X machine in a dry place. Never transport the LAVINA® X machine
unprotected; it may be damaged if transported unprotected during rain or snow.
4. OPERATION
PRELIMINARY CONTROLS
Inspect the working area as explained in the safety instructions. For wet use, fill in the water tank when the electrical
cable is disconnected. Connect the vacuum extractor and ensure that the vacuum hose is clear and it will follow the
machine easily. Plug in the machine and also make sure that the power cord is free to follow the working direction of the
Lavina®21-X.
ADJUSTING AND MOUNTING TOOLS
The machine should be not connected to electricity when changing the tools.
Figure 3.7
Figure 3.8
Figure 3.9
Figure 3.10
Figure 3.12
Figure 3.11
Figure 4.1
Figure 4.2
