2
Installation
Before you start:
Make sure that all the related equipment is power-off during the installation.
Check the specification of the products for the installation environment.
Make sure the power supply is matched with your voltage to avoid damage.
If the product does not function properly, please contact your LaView support team. Do not
disassemble the camera for repair or maintenance by yourself.
Please make sure that the ceiling or the wall is strong enough to withstand 3 times the weight of the
camera.
2.1
Ceiling Mounting for Bullet Camera
Steps:
1.
Drill the screw holes and the cable hole in the ceiling according to the supplied drill template.
2.
Hammer the supplied plastic expansion bolt into the screw holes.
Figure 2-1
Drill Template
3.
Route the cables to the cable hole and connect the corresponding power cable and video cable.
4.
Fix the camera to the ceiling with the supplied screws.
5.
Secure the camera to the ceiling with the self-tapping screws.
6.
Adjust the surveillance angle.
Figure 2-2
Secure the Camera to the Ceiling
1).Loosen No.1 adjusting screw to adjust the panning position [0° ~ 360°].
2).Tighten No.1 adjusting screw.
3).Loosen the No.2 adjusting screw to adjust the tilting position [0° ~ 90°].
Screw Hole
Screw Hole
Screw Hole
Template
