3
24
7.3 Brushing
• Wet the toothbrush head.
• Apply some toothpaste to the wet brush.
• To avoid splashing toothpaste around, insert the brush in
your mouth before turning it on.
• Turn the device on by pressing the On/Off button.
• Start by brushing the outside surfaces of the teeth. Press
the brush head slightly against the gums and brush the
teeth starting from the gums.
• Brush all teeth one after another, starting from the gum.
• Switch to the inner side and repeat these steps.
• Then brush the backs of your molars carefully.
•
Once you are finished brushing, turn off the device with
the On/Off button. The toothbrush will switch off and the
illumination will go off.
•
After finishing brushing, wash the brush head under
running water and dry.
Caution!
The toothbrush will switch off after 2 minutes.
At first, your gums may bleed slightly as a result of the new type
of irritation. This is normal. However, if this condition persists for
more than one week, consult your dentist.
8. CLEANING AND CARE
Warning!
Turn the device off and leave it to cool
down before cleaning to avoid electric shock or burn.
Caution! Do not clean the device with any chemicals, alkali,
abrasive or disinfecting agents, as they may damage the surface
of the device.
Correct and regular cleaning will improve the safety and extend
the life span of the device.
Summary of Contents for LST8443
Page 2: ......
