15
Fig. 12
Every pod introduced automatically expels the previous
one, which drops into the collection tray. The tray must be
emptied when it is full of pods.
If power drops below 22V dc during the issue of the beverage, the machine will not stop
working until the STOP button is pressed. Only then will all the warning lights, apart
from the “Power on” led, which will start flashing, go out and the machine will be
prevented from issuing further beverages until nominal conditions are restored.
Fig. 10
Fig. 11
WARNING
NEVER for any reason whatsoever
use your fingers to introduce
the pod into the compartment.
N
NO
O!!
GB
An automatic timer always interrupts the issue of a beverage after about two minutes.
The flashing “Water level” light indicates a lack of water in the tank: the beverage being
issued will be completed but the machine will not issue further beverages until normal
working conditions are restored.
If the red line starts flashing, switch off the machine and contact specialist staff for repairs.
When the red line is flashing or during the initial heating phase (cup compartment light
off) the machine is prevented from issuing beverages.
For coffee dispensing we suggest a maximum time of 90 seconds.
EP 2140 EP 24V:“EP 2140 EP 24V M44010” 9-03-2010 18:57 Pagina 15
