LAVAZZA EP 18000, Instructions Manual

Page: 17 / 76

E N
15
DISPENSING HISTORY
Press buttons A and B together to
see how many coffees you have
poured
SETTING THE TIME
Press and hold down button A
for a few seconds.
The display indicating the hour
begins to flash.
Release button A and press
button B repeatedly to set the
time.
Press button A .
The display indicating the minutes
begins to flash.
Release button A and press
button B repeatedly to set
the minutes.
Press button A to terminate the
operation.
7
Press the on/off switch, moving it to position I .
The on light and the digital clock come on (red
colour). The luminous “LAVAZZATIME” wording
flashes. When both lights come on the machine
is ready for use.
LOADING THE HYDRAULIC CIRCUIT
At the first start of the machine, after a long
period of inactivity or in case of lack of water
in the tank, it is necessary to perform the hy-
draulic loading as shown below.
1
Position a container or a cup under the steam
arm.
2
Turn the steam dispenser knob anti-clockwise to
begin dispensing steam.
3
Wait at least 20 seconds.
4
End the flow of steam by turning the knob clock-
wise until it is in its resting position and remove
the container or cup.
ENERGY SAVING
After 120 minutes of inactivity the machine goes
into energy saving mode, the LAVAZZATIME
wording fades and the two coffee dispenser
buttons switch off.
To turn the machine back on press one of the
two coffee dispenser buttons or lift the capsule
load lever.
MACHINE PREPARATION