EN
13
TECHNICAL TROUBLESHOOTING
TECHNICAL CHARACTERISTICS
Problem encountered
Possible causes
Solution
The machine does not turn on.
»
The machine is not connected to
the electrical outlet.
»
Verify that the plugs are inserted.
The indicator rings or the indicator light
does not turn on.
»
A failure has occurred.
»
Contact consumer services or your service
centre.
The pump is very noisy.
»
The temperature is not suitable.
»
The filter is not inserted correctly.
»
Top up the reservoir with cool potable water .
»
Verify the correct insertion of the Brita® filter (see
the instructions which came with the filter).
The machine does not dispense coffee.
»
Temperatura non idonea.
»
Steam dispensation has been
selected.
»
The capsule holder is not correctly
inserted.
»
Wait for the dispenser ready indicator ring
to light up.
»
Move the steam dispensation knob to the
standby position.
»
Ensure that the capsule holder is in the
fully inserted position.
The coffee is not hot enough.
»
The machine was not up to
temperature when the coffee
dispensation button was pressed.
»
Wait for the ready light to come on per-
manently.
The coffee does not spout or spouts
in drips.
»
The dispenser is clogged.
»
Clean the capsule holder (see maintenance
and cleaning).
The coffee spouts too quickly, the
espresso is not creamy.
»
The capsule has already been
used.
»
Insert a new capsule.
The milk or cappuccino does not get
foamy.
»
The milk is not suitable.
»
The milk is not cold enough.
»
The steam dispenser tube is
clogged.
»
Use fresh, partially skimmed milk.
»
Use refrigerated milk.
»
Clean the steam tube with a needle and
clean the steam spout.
No steam comes out.
»
The steam spout is clogged.
»
There is no water in the reservoir.
»
The filter is not inserted correctly.
»
Clean the steam spout (see maintenance
and cleaning). If the problem persists
ENSURE THAT THE MACHINE IS OFF AND THE
STEAM DISPENSER KNOB IS CLOSED
and clean
the steam dispenser tube hole with a thin
needle, ensuring that it is free of any ob-
structions and then turn the machine on
and dispense a small amount of steam.
»
Top up the reservoir with cool potable water.
»
Verify the correct insertion of the Brita®
filter (see the instructions which came with
the filter).
· Voltage: 220-240 V 50/60 Hz
· Total power: 850 W
· Capacity water tank: 2,5 L
· Dimensions: Height 34 cm
Width 24 cm
Depth 24 cm
· Weight: 4,3 kg
· Used cartridge/drop collection drawer: 8 cartridge
· Materials used for the machine body: Thermoplastic
For any problems not covered in the above table or if the proposed solution does not resolve the problem, refer to an authorised Lavazza service centre
For the technical characteristics refer to the data plate on the machine.
2006/42 CE – 2004/108 CE – 2006/95 CE
