LAVAZZA Amodo MIO User Manual Download Page 7

E N

TROUBLESHOOTING

TECHNICAL SPECIFICATIONS

Problem encountered

  Possible causes

  Solution

The machine does not turn on.

»

 The machine is not connected to the electric 
network.

»

 Connect the machine to the electric network.

»

 Contact after-sales service.

The machine requires a lot of time to heat up.

»

 The appliance is full of limescale.

»

 Descale the machine.

The pump is very noisy.

»

 No water in the tank.

»

 The tank has been fi lled without priming the 
water circuit.

»

 Refi ll with fresh drinking water.

»

   Carry out the priming of the water circuit (see section 

“Priming the water circuit”). 

It is not possible to insert the pod holder

»

 Pod holder in the wrong position.

»

 Pod inserted incorrectly.

»

 Change the pod holder position.

»

 Remove the pod and place it again.

The coff ee is cold.

»

 The indicator light was off  when the coff ee 
brew button was pressed. 

»

 Wait until the indicator light turns on. 

The coff ee is brewed too fast; the brewed coff ee 
is not creamy.

»

 Pod already used.

»

  Remove the pod holder and place a new pod.

Coff ee is not brewed or brewed in drips only.

»

 Clogged pod holder.

»

 The water circuit is empty.

»

  Carry out the dispensing spout wash cycle (see 

MAINTENANCE AND CLEANING).

»

 Carry out the priming of the water circuit (see Section 
“Circuit Priming”).

 Hot water/steam not dispensed.

»

 Clogged steam wand.

»

  Clean the spout with a needle (the machine needs to be 

unplugged and the steam/hot water dispensing knob 
needs to be closed).

The milk does not froth.

»

 Not suitable milk.

»

 The milk is too hot.

»

 The indicator light was not steady on.

»

  Use fresh, partially skimmed milk.

»

 Use milk at refrigerator temperature.

»

 Press the steam button and wait for the indicator light 
to turn on.

·

    Nominal Voltage - Power Rating - Power Supply:

See label on the appliance

·

 Size: 

Height 

Width 

Depth

 

 

318 mm 

187 mm 

276 mm

·

  Weight: about 5 kg

·

  Water tank: about 1.4 litres - Removable

·

  Materials used for the chassis: Thermoplastic material

·

  Power cord length 1.2 m

·

  Control panel: On the upper part

·

 Boiler: Aluminium

·

   Safety devices: Pressure safety valve.  

·

   Double thermal fuse

Please contact a Saeco service centre for any faults not covered in the above table or when the suggested solutions do not solve the problem.

2006/42 EC - 2004/108 EC - 2006/95 EC

Summary of Contents for Amodo MIO









Reviews: