6
1. Operating the Lava SPH-USB 1.1 Hub under Windows® 95 requires
patches to the operating system software (available from
Microsoft®) and possibly a BIOS patch (consult your motherboard
manufacturer).
1. To maintain sufficient power supply during its operation, be sure the
SPH-USB 1.1 Hub is plugged in and its adapter is properly
connected to an electrical outlet.
2. Do not install the driver under ‘Add New H/W’ (this may cause your
system to crash).
3. In case installation was incomplete or interrupted, double click
‘Control Panel,’‘Property,’ then remove ‘Unknown Device.’ Select
‘Refresh,’ and continue the installation procedure.
4. If the Lava SPH-USB 1.1 Hub is connected from another USB Hub, to
maintain sufficient signal transfer, be sure the SPH-USB 1.1 Hub’s
power supply is plugged into an electrical outlet.
Windows® 95 operation
Other
Application Notes (continued)
System Requirements
Connectors
1. Pentium-grade CPU with USB port PC.
2. One available USB Type A (downstream) port.
1. One high-speed bi-directional parallel port.
2. One DB-9 EIA-232 serial connector supporting baud rates from 1200
to 115,000 baud.
3. One USB 1.1 Type B (upstream) connector.
4. Three USB 1.1 Type A (downstream) connectors.
5. DC power input connector (5V).
