7
it down. Align the golden contacts of the battery to the contacts in the phone, and then gently snap
down the battery into place. Re-assemble the back cover.
To uninstall the battery, flip the battery out from the bottom of the battery.
Charging battery
Plug the charger into the socket on the side of your phone. Connect the charger to an AC wall socket.
The blinking of the battery level icon indicates the battery is being charged. When the blinking stops,
it indicates the charging is finished.
During charging, the phone and charger will feel warm to the touch. This is normal.
Memory Card
To install the T-flash card, remove the back cover and battery from the phone. Pull card deck and
then put it up, then the T-Flash card can be installed
Make the same operations to uninstall the T-flash card.
Keypad Lock and Unlock
In the standby mode, press the Left Soft Key and then * Key in quick succession to lock the keypad
manually and Left Soft key and * key to unlock the keypad.
Emergency call
If any emergency arises, dial 112 (or other emergency call number) for emergency help.
Call Function
After the setup described in the previous sections is completed, you are ready to make and receive
calls using the basic information provided in this section.
Note
: When you are using headset, please plug/unplug the headset gently to avoid damaging the
headset jack.
Dialing
When the network carrier is shown on the screen, your phone has entered the Standby mode and
you may make or receive calls. If you have installed two SIM cards, the two network carriers will both
appear on the screen.
To make phone calls, you may dial the number from the Dial screen or from your phonebook.
Direct dial
Press the function key with respect to the dial icon on the Home screen.
Dialing from Contacts
Enter Phonebook from the Main Menu. You may use alphabet for quick search of the names.
Unanswered call
If you have set up Auto Re-dial, your phone will automatically re-dial the last unanswered number