- 9 -
3.2 SIM Card/T-Flash Card Installation
Your phone supports two SIM cards.
To install the SIM card in the lower layer, follow the steps:
1. Find the small pin shown in figure
below and pull it out slowly with your
finger.It will then open a tray to insert
and pull the SIM card.
2. Insert the SIM card and push the
slot back.
To install the SIM card in the upper layer and T-Flash card, do as following figures
show:
Caution:
Do not bend or scratch your SIM card and T-Flash card. Avoid exposing
your SIM card and T-Flash card to static electricity, water, or dirt.
Tips:
Place the gold color contact point of SIM card towards the cell phone and
push the SIM card into the slot. With the metal contacts facing down, gently slide
the T-Flash card into the slot. Press and pull up the cover to lock it.
3.3 Charging the Battery
Insert the charger into USB interface of the phone.
Connect the charger to a standard wall outlet and the battery power icon in the
up-right corner of the screen will start scrolling. When the battery bar stops
scrolling, the battery charge is complete. Press the two sides of the charger plug
and disconnect the charger from the phone.
When the battery is low, a "low battery" message will display across the screen
and the battery icon will seem empty. If the battery level is insufficient, the phone
will turn off automatically. Do not use your phone under low battery state for an
extended period of time or it may cause battery damage.
3.4 T-flash Card
Insert the T-Flash card into phone. This will expand the Flash memory of the
phone.
3.5 USB Cable
You can transfer and store files, such as MP3, MP4 and pictures from PC, through
USB cable, to the mass storage in phone or identified SD card that is inserted.
Summary of Contents for KKT 20+
Page 1: ......