Lava eSynC-1U-OEM Reference Manual Download Page 6 | Manualshive

Page: 6 / 36

background image

LAVA Computer MFG Inc. eSynC Product Family - Reference Manual – C03

2 Vulcan St. Toronto, ON

Tel: +1 416 674-5942

www.lavalink.com

Canada, M9W 1L2

Toll Free (US & Canada): 800 241-5282

6 of 36

Product Features

Overview

The eSynC and nSynC products share the following core features:



USB Host operation with simultaneous mobile device charging



Available with multiple USB-2.0 receptacles



Wired networking (10/100 Ethernet) support



Option for Power over Ethernet (PoE) support



Option to be powered from standard USB Power Adapters



Option to be powered from any regulated 5-volt power supply



Option to be powered from a 12 or 24-volt unregulated DC power source

The eSynC products include the above core features as well as the following extended features:



Support for installations running 24/7



Battery modulation for the tablet and mobile phone longevity



Enhanced Network Management for reliable network operation



Screen brightness control for reduced heat generation



Up to 5 USB-2.0 receptacles

The eSynC extended features rely on the LAVA product working in unison with the LAVA
Tablet Manager application. Installation of the LTM application is mandatory before using an
eSynC product.

USB Host Operation with Simultaneous Charging

The primary feature of all eSynC and nSynC products is to allow the charging of select Samsung
mobile devices while interacting with USB accessories. The LAVA products do not draw power
from the Samsung mobile device and only allow USB accessory operation while being powered
by an external power source.

The compatible mobile devices have been verified to support USB Host operation while also
allowing the device to be charged. The USB-C specification allows for many levels of
functionality to be implemented by each manufacturer. Not all aspects of USB-C and USB-C PD
(Power Delivery) are implemented on a device just because it has a USB-C receptacle.

Note

:

If your use case requires USB accessories to be operated with and without an
external power source, please contact LAVA Sales as other LAVA products not
described in this document are designed for this situation.

«
...
4
5
6
7
8
...
»

Summary of Contents for eSynC-1U-OEM





































Reviews:

No comments

Related manuals for eSynC-1U-OEM

Brand: Paradyne Pages: 2

Brand: Aztech Pages: 2

Carlyle Tools 791-7136

Brand: Napa Pages: 13

Brand: NI Pages: 11

Brand: Alvarion Pages: 2

EZ Connect N SMCWUSBS-N

Brand: SMC Networks Pages: 64

Brand: J5create Pages: 2

Brand: Proware Pages: 39

Brand: StarTech.com Pages: 11

Brand: D-Link Pages: 36

Brand: Sanyo Pages: 1

Brand: Sanyo Pages: 26

Brand: Sanyo Pages: 87

XETB1001 - 85 MBit/s Powerline Network Adapters

Brand: NETGEAR Pages: 2

WIRELESS N ADAPTER RNX-N150UBE

Brand: Rosewill Pages: 26

Brand: Rosewill Pages: 2

Brand: Rosewill Pages: 9

Brand: Rosewill Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands