- 3 -
3.2 SIM Card/T-Flash Card Installation
Your phone supports two SIM cards.
To install the SIM card in the lower layer, follow the steps:
1. Find the small pin shown in figure
below and pull it out slowly with your
finger. It will then open a tray to insert
and pull the SIM card.
2. Insert the SIM and push the slot
back.
To install the SIM card in the upper layer and T-Flash card, do as following figures
show:
Caution
: Do not bend or scratch your SIM card and T-Flash card. Avoid exposing
your SIM card and T-Flash card to static electricity, water, or dirt.
Tips
: Face the gold color contact point of SIM card towards the cell phone and
push the SIM card into the slot. With the metal contacts facing down, gently slide
the T-Flash card into the slot. Press and pull the cover up to lock it.
3.3 Charging the Battery
Insert the charger into USB interface of the phone; the flash symbol on the charger
plug must face upwards.
Connect the charger to a standard wall outlet and the battery power icon in the
up-right corner of the screen will start scrolling. When the battery bar stops
scrolling, the battery charge is complete. Press the two sides of the charger plug
and disconnect the charger from the phone.
Summary of Contents for Discover 137
Page 1: ...I ...
