18
store on the SIM. You can take out the SIM card from the phone and insert it into
another GSM phone to use it. Most new phones will recognize the SIM card
automatically.
Do not touch the golden contacts of the SIM card; place it away from electricity and
magnetism to avoid damage. You will not be able to use the phone if the SIM card
is damaged.
Note:
Before inserting and taking out the SIM card, always make sure that the phone
is switched off and disconnected from any external power source; otherwise
both the phone and the SIM card may be damaged.
Installing and uninstalling SIM Card
The SIM card usually comes attached to a special card. The metal contacts of SIM
card can be easily damaged by scratching, so take it out carefully before assembling
it into the phone.
Switch off the phone, remove the back cover, battery and other external power
source. Fit the SIM card into the SIM card slot. Align the angled corner of the SIM
card with the slot. Slide in the SIM card, make sure it is in place, install the battery,
and restore the back cover.
Likewise, to remove the SIM card, switch off the phone, remove the battery and
then take out the SIM card.
Connecting to the Network
After the SIM card is unlocked, your phone will automatically search for the
registered network or other available local network. Once connected, the name of
the network carrier will appear on the top of the screen.
Your phone is now in Standby mode, ready for making and receiving calls.
Call Function
After the setup described in the previous sections is completed, you are ready to
make and receive calls using the basic information provided in this section.
Note
:
When you are using headset, please plug/unplug the headset gently to avoid
damaging the headset jack.
Dialing
When the network carrier is shown on the screen, your phone has entered the
Standby mode and you may make or receive calls. If you have installed two SIM
