6
ASSEMBLY INSTRUCTIONS
Top portion
Bottom panels
Base plate
Wheel kit
Hardware Used
2
1
1. Heater is partially preassembled at the
factory. User needs to complete a couple of
assembly procedures to make the appliance
operational. First, please ensure all transit
protection (foam, cardboard, buuble wrap,
etc.) is removed. Next identify the 4 main
items listed and illustrated to the right.
2. Install wheel kit to base plate by inserting
(2) x
Bolt Ø10 ×15mm through the wheel kit
and base plate and securing them with (2) x
Nut M8 (use supplied wrench to tighten).
Top View
OO
Wrench
Qty. 1
EE
Bolt Ø10 ×15mm
Qty. 2
HH
Nut M8
Qty. 2
