Lava Heat Lazzaro, Owner'S Manual

Page: 4 / 17

Connection to 220-240 Volts Power Supply
It is important to ensure that the electricity supply is of adequate capacity for the
electrical load required by the appliance being installed.
These appliances must be earthed.
INSTALLATION
The Lazzaro is built with the best quality components in accordance to the prevailing
legal regulations and certified for safety in use. For best results from the appliance
please ensure that the installation is done by a qualified electrician in accordance with
the following instructions and taking full account of current regulations. When using the
heater, please carefully follow the instructions and recommendations below.
INSTALLATION TO WALL
When fixing the heater to a wall, ensure hinges are in the underside so that the lid
hands down in the open position.
Minimum required distances:
a) 500mm from the side wall
b) 500 mm from the ceiling
c) Installation height above 1.8M
INSTALLATION
You could change the position of the M4*8
screws and the M6*10 screws for the best
Angle of heating. We have 6 positions for your
choice. (near:0°
,
16°
,
32°
,
far: 0°
,
16°
,
32°)
7
9