2
Changing Com numbering of the 2SP-PCIe ports
In Windows 2000/XP/Vista, Com port numbering can be changed by
double-clicking the serial port entry displayed in Windows' Device
Manager (as described earlier). Go to Port Settings | Advanced, and
choose Com Port #.
Release Notes:
A. Because the 2SP-PCIe card uses PCI (not ISA) I/O address ranges, it
will never be seen by your BIOS at boot-up as a standard port even if
the address has been changed in Windows using the above
procedure. This is normal, and does not indicate a fault in your 2SP-
PCIe card.
B. In standard installations of Windows 2000/XP/Vista, the I/O address
cannot be changed to a legacy address.
