LMW - Colony Collection Owner’s Manual
Contents
Page
Contents
Page
Specifications
1
Plumbing Instructions
2
Rough In Instructions
2
Care & Cleaning
3
Electrical / Wiring
2
Extra Options / Features
3
About this Owner’s Manual
Laurel Mountain Whirlpools has gained popularity by the variety of bathtubs available and the extensive list of
options for each type of tub. This manual covers the installation, operation, and maintenance needs for all of
the Colony Series Laurel Mountain soaker tubs. If you have any questions or need additional information on
your Laurel Mountain Whirlpools bath, you can contact our customer service department at 1-800-930-0050
between 6:00 am and 6:00 pm EST Mon-Fri.
*INSTALLATION WARNING SAFETY*
*Please follow these instructions to insure an easy and safe installation process. Any deviations, additions,
or deletions to your Laurel Mountain Whirlpools tub or it’s hardware will void the warranty of this product
if written approval is not obtained from the manufacturer.*
Use this tub for its intended purposes described in the manual. The manufacturer does not recommend using
any attachments not specifically approved in this manual. DO NOT allow any electrical appliances near the
bath tub. DO NOT use alcohol, drugs, or medication as this will greatly increase your risk of hypothermia or
drowning. DO NOT allow children to use the bathtub without adult supervision. DO NOT use options NOT
installed by the manufacturer. Do not use if you are or think you are pregnant, consult your physician before
using the bath tub.
Your Laurel Mountain Whirlpools unit was created to your order specifications. The tub was constructed from
an acrylic shell cast. It was then reinforced with a mixture of chopped fiberglass in a polyester resin applied to
the backside of the shell. The base of your unit was designed to give uniform support to the tub floor and has
been pre-leveled. It meets or exceeds load-bearing and impact resistance requirements of the listed standard
without evidence of crazing or cracking and with minimal deflection when installed in accordance to Laurel
Mountain Whirlpools printed instructions.
PRIOR TO INSTALLATION
Immediately inspect your tub upon arrival. If any damage has occurred, make a notation on the freight
carrier’s proof of delivery. DO NOT remove the bath from its shipping container until you are ready to install.
Be sure the drain and overflow fit properly prior to installation. We also recommend cutting cardboard from
the shipping container to place inside the tub to protect its floor. Any defects that are discovered
MUST
be
reported at this time to qualify for warranty coverage. Qualified plumbers
MUST
be used for all tub
connections to assure you follow local codes and acquire any permits required for the install.
