1. Determine which side of the unit will have the easiest access, and secure the
Wall Fixing
Strap
to one of
the pre-drilled holes in the back panel
(Fig 2)
with the
Screw (D)
and
Washer (B)
(See illustration)
.
2. Place the unit in the desired position and move it approximately 5cm away from the side with the fixing strap.
3. Secure the loose end of the
Wall Fixing Strap
to the wall using a suitable fixing
(NotSupplied)
and move
the unit back into position, to hide the strap.
Before drilling, check for any hidden water pipes or
electrical wires.
4. If for any reason you need to move your furniture,
simply remove the wall fixing screw.
Fig1
Fig 2
Fig 1
Lay the unit on its back.
We recommend that the packaging is used to protect the surfaces during this
process.
Place the plinth onto the bottom of the unit (Align the pre drilled holes on the plinth with the pilot holes on the
base panel) Secure the plinth using
8 Screws (A)
. Tighten with screw driver.
Fig 2
Carefully turn the assembled cabinet upright onto its feet.
A minimum of two persons will be required to do this.
Care and Maintenance.
Please refer to Laura Ashley Care Guide
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
If you have any queries with this product please contact
Laura Ashley Customer Services. Tel: 08719835999
www.lauraashley.com
3
D
1
2
A
C
B
