Laundrylux DAWF0 SERIES Installation Manual Download Page 2

2

112819-1

We have tried to make this manual as complete as possible and hope you will find it useful.  The manufacturer

reserves the right to make changes from time to time, without notice or obligation, in prices, specifications,

colors, and material, and to change or discontinue models.  The illustrations included in this manual may

not depict your particular dryer exactly.

IMPORTANT

For your convenience, log the following information:

  DATE OF PURCHASE ________________________________________________________ MODEL NO. ______________

  RESELLER’S NAME __________________________________________________________________________________

  SERIAL NUMBER(S) __________________________________________________________________________________

____________________________________________________________________________________________________

____________________________________________________________________________________________________

These instructions are only valid if the following country code is on the appliance… If this code is not

present on the appliance, it is necessary to refer to the technical instructions which will provide the necessary

information concerning the modification of the appliance to the condition of use for the country.
In accordance with EN ISO 3166-1, the names of countries shall be represented by the following codes:

GB

United Kingdom

IE

Ireland

Retain This Manual in a Safe Place for Future Reference

This product embodies advanced concepts in engineering, design, and safety.  If this product is properly

maintained, it will provide many years of safe, efficient, and trouble free operation.

Only qualified technicians should service this equipment

.

OBSERVE ALL SAFETY PRECAUTIONS

 displayed on the equipment or specified in the installation

manual included with the dryer.
The following “

FOR YOUR SAFETY

” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline

or other flammable vapors

and liquids in the vicinity of

this or any other appliance.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence

ni d’autres vapeurs ou liquides

inflammables à proximité de cet

appareil ou de tout autre appareil.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the

instructions  to  be  followed  if  the  user  smells  gas.    These

instructions must be posted in a prominent location near the dryer.

Summary of Contents for DAWF0 SERIES























Reviews: