+1.800.867.4580 [email protected] www.laundryjet.com
12
Return Unit Pipe Drop
4.4
Pipe Installation Overview
Return Unit Pipe Drop
▪
Directly above your return unit on the ceiling use pipe drop template to cut hole positions in
the ceiling.
▪
Install a standard swept 90 drop to each port using a swept 90 elbow.
▪
Strap pipe at attic to ceiling transition.
▪
Make connection to Return Unit inlet using structural tape.. Make sure that Vacuum
Chamber connection has a complete seal for maximum performance.
▪
Wrap tape around seam repeatedly to produce a thick stable joint.
Air out to
main trunkline
Clean laundry in
from laundry room