LAUNCH
X431 PAD Scopebox User’s Manual
Precaution on Operation
z
The appliance is a sophisticated electronic device, never have it clashed
when in use.
z
Main unit screen may flash at the moment of engine ignition, which is
normal.
z
You may unplug the main unit if the program can not be actuated or
confused screen occurs. Plug again to continue the operation.
z
Make sure the appliance is properly connected to the DLC to avoid
communication interruptions.
z
During operation, keep the screen upward and leveled.
z
Be careful when plugging and unplugging the main cable and diagnostic
connector. Tighten the screw before operation to avoid unexpected
disconnecting and/or damage to the port.
z
Handle with care. Avoid collision. Unplug the power after operation.
z
After the operation, the stylus shall be inserted into the slot on the main
unit, and put away the cable and connector, etc accessories to the box to
avoid the lost.
z
Unplug the power cable by holding the connector, not the cable itself.
