background image

X-431  Turbo  III  User  Manual

 

50 

5.5.1 Health Reports 

This  module  stores  all  diagnostic  reports  generated  in  process  of  vehicle 
diagnosis.   

All  diagnostic  reports  are  sorted  by  Date  and  Make.  Tap  the  desired  type  to 
re-arrange and filter it.     

•  To select certain report, check the box before the report. To select all reports, 

tap “Select All”. To deselect all, tap “Unselect”. 

•  To share the report with others, select the desired one and then tap “Share”. 

•  Select the desired report and then tap “Delete” to delete it. 

•  To change the filename of report, tap “Rename”. 

•  To quickly locate the desired report, tap “Filter”. 

•  To exit the full screen, tap “Exit full screen”. 

5.5.2 ADAS Reports 

This module stores all  ADAS reports generated in process  of ADAS calibration 
operations.   

5.5.3 Remote Reports 

This option lists all saved remote diagnostic reports when performing the Tech 2 
Tech remote diagnostics. 

5.5.4 ROXIE Reports 

This option stores all vehicle inspection reports generated by the ROXIE W 
device that has been bound to the tool. 

5.5.5 Recorded Data 

If user records the running parameters  or waveform graphs while reading  data 
stream, it will be saved as diagnostic records and appear under this tab. 

Tap “Recorded Data”, and select certain diagnostic record to enter. 

Select the desired  data stream  items  and tap “OK” to navigate to the playback 
page. 

Summary of Contents for X-431 Turbo III













































































Reviews: