LAUNCH
X-431 PROS V4.0 User Manual
67
ok
at + reboot = 1
rebooting...
1. Tap “Reset” to configure the printer.
Step 1: Connect the printer:
Tap “Scan” to start scanning and select the desired printer hotspot named
with X-431PRINTER-XXXX (XXXX stands for 4 characters), and then tap
“Connect” to enter Step 2.
Step 2: Join the printer into LAN:
Tap “Scan” to select the desired local WLAN network from the list, and type in
the security password (If it is an open network, password is not required), and
then tap “Confirm”.
4. Once the WLAN network of the printer is connected and the printer is found,
tap “Printing test” to test the printing.
Now you can use the printer to print!
If the printer is not found, please reset the printer to default factory settings (refer
to Step 2 for details) and check whether the current device and the printer are on
the same LAN.
B. If you have configured the printer to the LAN:
2. Tap “Connect to Printer”:
a). If the local network remains as it is, tap “Test Print” directly to test the
printing.
b). If the local network changes, you have to reset the printer.
9.8.4 Orientation
The option is used to set the screen display orientation.
9.8.5 Clear Cache
This option allows you to clear the App cache. Clearing the cache will restart the
App.
9.8.6 About
The software version information and disclaimer are included.
