4.3 WORKPLACE REQUIREMENTS
Fig.2 shows maximum machine space requirements and minimum distance of 500mm from walls.
Screw M10
Screw M10
4.4 ASSEMBLY
The following steps show how to install the DAAR ARM.
1
）
Disconnect the tire changer from the electric power source and the compressed air circuit.
2
）
for installation of DAAR ARM. Pull the DAAR ARM to right side of machine. Using a M10 Screw mount
the tire changer.
3
）
Connect the air hose
（
Ø8mm
）
that introduced through the rear hole of the box with the corresponding
joint of T-union.
4
）
For IT version
，
connect the hose
（
Ø6mm
）
through the body to the fittings of the five-way valve ac-
cording to corresponding marks.
for installation of DAAR ARM. Pull the DAAR ARM to right side of machine. Using a M10 Screw mount the
tire changer.
