![background image](http://html1.mh-extra.com/html/launch/creader-v/creader-v_user-manual_3873402019.webp)
LAUNCH Creader V+ User’s Manual
11
4. Operations
4.1 Connection
1) Turn the ignition off.
2) Locate the vehicle’s 16-pin Data Link Connector (DLC).
3) Plug the OBDII cable into the vehicle’s DLC.
4) Turn the ignition on. Engine can be off or running.
5) After finishing, press [
]
button to enter
Main
Menu
as following figure 4-1:
Figure 4-1
CAUTION: Don’t connect or disconnect any test equipment with ignition on
or engine running.
4.2 Diagnose
Select [Diagnostic] in
Main Menu
and press [
], the screen will display Monitor
Status interface as following figure 4-2:
Figure 4-2
Summary of Contents for Creader V+
Page 1: ...2013 10 11 V1 00 000...