![background image](http://html1.mh-extra.com/html/launch/creader-629/creader-629_user-manual_3863114003.webp)
LAUNCH
629 User's Manual
II
www.x431.com +86 755 8455 7891
Operating or observing the tool will cause driver distraction and could cause
a fatal accident.
•
Wear safety eye protection that meets ANSI standards.
•
Keep clothing, hair, hands, tools, test equipment, etc. away from all moving
or hot engine parts.
•
Operate the vehicle in a well-ventilated work area: Exhaust gases are
poisonous.
•
Put blocks in front of the drive wheels and never leave the vehicle
unattended while running tests.
•
Use extreme caution when working around the ignition coil, distributor
cap, ignition wires and spark plugs. These components create hazardous
voltages when the engine is running.
•
Put the transmission in P (for A/T) or N (for M/T) and make sure the parking
brake is engaged.
•
Keep a fire extinguisher suitable for gasoline/chemical/ electrical fires
nearby.
•
Don’t connect or disconnect any test equipment while the ignition is on or
the engine is running.
•
Keep the test equipment dry, clean, free from oil/water or grease. Use a mild
detergent on a clean cloth to clean the outside of the test equipment, when
necessary.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Summary of Contents for Creader 629
Page 1: ...V1 00 001 05 27 2020...