LAUNCH KWA-300 3D Wireless Wheel Aligner Operation Instructions
4-5
passed, the screen will display the interface as shown
in Fig.4.16.
Fig.4.16
There is a red arrow head on each wheel, which
instructs the operator to pull the vehicle slowly as per
the arrow direction, after 20cm (approximately)
passed(return to the original position), the screen will
display the interface as shown in Fig.4.17.
Fig.4.17
Several seconds later, the screen will display the
kingpin test interface as shown in Fig.4.18.
Fig.4.18
Please center the steering wheel according to the tips
on the above interface, and then click the icon of
START TEST, the screen will display the interface as
shown in Fig.4.19.
Fig.4.19
Turn the steering wheel right slowly according to the
tips on the above interface, when the turning angle is
more than 20
º
, please turn the steering wheel left
slowly, the screen will display the interface as shown
in Fig.4.20.
Fig.4.20
Continue to turn the steering wheel left according to
the tips on the interface, when the turning angle is
less than -20
º
, please turn the steering wheel right
slowly; when the little ball stay in 0
º
position, its color
become green from red, indicating that the steering
wheel has been centered, and then please lock the
steering wheel, the screen will display the interface as
shown in Fig.4.21.
Fig.4.21
