- 7 -
AFTER A BLACKOUT
After a blackout the instrument DOES NOT come on again automatically, you have to press ON.
To guarantee an automatic restart after a blackout, disable the ON key as follows:
-
disconnect power supply and open the instrument;
-
identify flat connectors coming from the keypad on the main board;
-
extract the 4-pole connector;
-
short-circuit the following pins using the unused jumper inside the instrument:
▫
WDESK: the two pins further in compared to the main board (see picture to the left);
▫
WINOX - WTAB: the two outer pins compared to the main board (see picture to the right);
-
connect the 4-pole flat to the two pins still free complying with initial orientation.
