Lauda VC 1200, Operation Manual

Page: 25 / 100

The hoses specified below can be used for all heat transfer liquids
that are approved for the devices.
Table 3: Hoses
Type
Device
Pump connec-
tion
Accessories required
(nipple and screw cap
are provided on the
device as standard)
Maximum
operating
pressure
Clear
width x
outer
diameter
in mm
Tem-
perature
range in °C
Catalogue
number
EPDM hose with
fabric reinforcement
VC 1200 to VC
5000 (W)
G
¾
(15),
nipple ¾"
Hose nozzle with screw
cap EOA 004
10 bar 19 x 27 -40 – 100 RKJ 032
EPDM hose with
fabric reinforcement
VC 7000 to VC
10000 (W)
G 1
¼
(20), nipple
1"
Hose nozzle with screw
cap EOA 003
10 bar 25 x 34 -40 – 100 RKJ 033
Table 4: Hose clips
Suitable for hose Clear width Ø in mm Catalogue number
RKJ 112, RKJ 031 12 — 22 EZS 013
RKJ 032, RKJ 033 25 — 40 EZS 016
4.2.2 Connecting an external consuming unit
CAUTION!
Risk of heat transfer liquid escaping during operation due to
open consuming unit
Electric shock, scalding, cold burns

Always use hydraulically sealed consuming units.
CAUTION!
Risk of external hydraulic circuit bursting due to overpressure
Scalding, cold burns

When laying the hoses, make sure they cannot kink.
V08 Variocool 25 / 97