5.
The gateway starts automatically when it is supplied with power. An
existing cellular connection is indicated by permanent illumination of
the LEDs on the rear. Flashing of the "2G-3G-4G" or signal strength
LEDs indicates that a cellular connection has not been established. It
can take up to three minutes to establish a cellular connection when
the system is started. If there is still no connection after this time,
you may not have network coverage at the installation location. Try to
place the antenna in a different location or place the gateway with the
antenna in a better location.
6.
Please refer to the operating instructions of your Ultracool for further
information.
Table 1: Overview of technical data for the gateway*
Power supply/power unit
100 – 240 VAC, 50/60 Hz
Power consumption
< 5 W
Protection level
IP30
Temperature range
-40°C to 75°C
Air humidity
10% to 90%, non-condensing
Casing size (W x H x D)
74.5 mm x 25 mm x 64.4 mm
* Data has been taken from the Teltonika TRB140 data sheet. Further
detailed information can be obtained from the gateway manufacturer Telto-
nika.
https://teltonika-networks.com/product/trb140/
V1
Ultracool 4G Gateway and M2M SIM cards
1
1
/
24
