Proline Kryomats
41 / 137
The dialog language also can be changed later via
Settings
Basic settings
Language
.
Mark the required language with or .
Confirm the selection with .
7.3
Switching off / standby
Switching off: Set the rotary switch on the front panel to "OFF = 0".
When switching off only on the master head, using the switch at the front or back, there is still voltage
present on the unit or head.
Standby operation: Use the key standby (
7.5.3) on the Command remote control. The pump, heating and
cooling unit are switched off, but the operating display remains active, so that status displays can be viewed and settings
carried out.
However, a started timer (
7.10) continues to run. Stop as required with Pause.
7.4
Key functions
Your Proline Thermostat is easy to operate.
7.4.1
General key functions and pilot lamps
Master
Enter key:
From the actual-value display at the main menu level,
activates input, display flashes,
saves input, display ceases to flash and menu point is left,
press for approx. 3 seconds: Exit function and returns to bath temperature
display.
or
Paging with keys is possible within the relevant level,
or setting of numerical values.
Pump Menu
End
T
set
T
fix
English
Deutsch
Français
Español
Display
Sounds Master
Sounds Command
Language
Master-Mode
Autostart
Current Consumpt.
