Proline Kryomats
35 / 137
Metal hoses in non-rusting stainless steel, with union nut M16 x 1, internal width 10 mm.
Type
Length (cm)
Temperature range °C
Field of application
Order number
MK 50
50
-90 – 150
With foam insulation for
refrigeration range,
for all heat transfer liquids
LZM 052
MK 100
100
-90 – 150
LZM 053
MK 150
150
-90 – 150
LZM 054
6.5
Connecting external loads
Notice
Leaks from consumers, hoses and accessories
Environmental hazard from leaking heat transfer liquid
Always secure the hoses with suitable safety devices.
Notice
Pump connections not closed off
Environmental hazard from leaking heat transfer liquid
Fit sealing plugs to the pump connections when no external
consumers are connected and set the flow distribution to
internal “INT”.
Operation as circulating thermostat
Caution!
Bursting of the external consumer due to overpressure
Scalding, frostbite, cutting
Use a pressure relief device on pressure-sensitive consumers
(e.g. glass reactors).
When used as circulation thermostat, care for shortest
hose connections with largest inner diameter as possible.
This gives the best flow.
Push hose with 11-12 mm internal width onto hose
olive (accessories) or connect metal hoses (
6.3) to
pump connectors.
Pump connectors at side:
Inlet and outflow
see labeling housing.
Pump connectors at back:
Inlet and outflow
see labeling housing.
Set bypass valve to "external" (
3).
