Lauda Mobifreeze M270, Operation Manual, Page: 61 / 94

Personnel:
n
Instructed person
Protective equipment:
n
Safety glasses
n
Protective gloves
1. Switch off the device at the mains switch and battery switch, see
Ä
Chapter 6.2 “Switching the device on and off” on page 41 and
Ä
Chapter 4.5.2 “Main battery switch” on page 26.
2. Disconnect the mains cable from the power supply, and wind up.
3. Open the ventilation grid to access the condenser.
4. Clean the fins on the condenser with a brush or use a vacuum cleaner
or compressed air to clean the fins. Do not apply pressure to, or
damage, the fins.
5. Refit the ventilation grid.
6.
Connect the device to the mains power supply, see
Ä
Chapter 6.1
“Establishing a mains connection” on page 40.
8.5 Defrosting the refrigeration compartment
Defrost the refrigeration compartment of the device whenever necessary, or
if there is heavy freezing.
WARNING!
Refrigerant leaks
Fire, device damage

Allow the ice in the refrigeration compartment to defrost
on its own.

Do not place heating devices in the refrigeration compart-
ment.

Do not use sharp objects or chip/scrape off the ice.
Personnel:
n
Instructed person
Protective equipment:
n
Cold protection gloves
1.
Switch off the device at the main battery, see
Ä
Chapter 6.2
“Switching the device on and off” on page 41 and
Ä
Chapter 4.5.2
“Main battery switch” on page 26.
2. Pull out the mains plug from the power socket and wind up the mains
cable.
NOTICE!
Make sure that liquids cannot enter the cable connec-
tions or the electrical components inside the device.
3. Open the refrigeration compartment on the device.
4. Remove the contents from the refrigeration compartment.
5. Allow the ice to defrost.
V1 Mobifreeze 61 / 93