Lauda Mobifreeze M270, Operation Manual, Page: 6 / 94

1 Safety
1.1 General safety instructions for the device
IMPORTANT:
n
Always read the operating manual carefully before operating the device.
n
This operating manual is part of the device. If the device is passed on, the
operating manual must be handed over with it.
n
The information in this operating manual must therefore be kept at hand
in the immediate vicinity of the device.
n
Be sure to carefully store this copy of the operating manual.
n
The operating manual is available on our website (https://www.lauda.de).
n
The device must only be operated as intended under the conditions
stated in this operating manual. Any other mode of operation is con-
sidered to be unintended use and could compromise the protection
provided by the device.
n
The device is not designed for use in medical applications in accordance
with DIN EN 60601-1 and IEC 601-1.
If this operating manual is lost, contact LAUDA Service. You
can find the contact information here
Ä
Chapter 13.4 “Contact
LAUDA” on page 71 .
When operating the device, there is a risk of injury from low temperatures,
fire and the presence of electrical energy. These risks posed by the device
have been mitigated in the design to the extent possible in keeping with
the applicable norms. The remaining risk can be reduced using one of the
following measures:
n
Safety equipment is available for the device. This equipment is crucial
for device safety and must be controlled by the user. All maintenance
intervals must be observed and appropriate maintenance activities must
be performed to ensure the functionality of the equipment.
n
The safety equipment for the device is described in this "Safety" chapter.
n
Various warning symbols are located on the device. These symbols must
be observed without fail.
The warning symbols on the device are described in this "Safety" chapter.
n
Personnel and the protective equipment worn by personnel are also
subject to specific requirements.
These requirements are described in this "Safety" chapter.
n
The device may only be operated by trained personnel.
n
Transport and move the device carefully. Never tilt the device.
n
Never put the device into operation if:

it is damaged,

it is leaking (for example, refrigerant is escaping),

the mains cable and/or other cables are damaged.
n
Switch off the device and pull out the mains plug, see
Ä
Chapter 6.2
“Switching the device on and off” on page 41:

before starting service work, maintenance work or repair work

when moving the device

when installing or removing modules or accessories
V1 Mobifreeze 6 / 93