Lauda Mobifreeze M270, Operation Manual, Page: 60 / 94

Personnel:
n
Instructed person
Protective equipment:
n
Protective gloves
Please also note the following:
n
Only use water and detergent to clean the Touch control element and
other surfaces. Do not use acetone or solvent as these substances will
permanently damage the plastic surfaces.
n
Ensure that the device is decontaminated after coming into contact with
hazardous materials.
n
It is forbidden to use decontaminants or cleaning agents that may react
with parts of the device or materials contained in those parts and poten-
tially pose a hazard.
n
We recommend using ethanol as a decontaminant. If you are unsure
whether decontaminants or cleaning agents are compatible with device
parts or the materials contained in those parts, please contact LAUDA
Service.
8.4 Cleaning the condenser fins
In order to ensure that the device operates efficiently, the condenser fins
must be cleaned monthly or more often, if necessary, in dirty ambient
conditions.
WARNING!
Incorrect handling, refrigerant leaks
Fire, cutting

Only open the ventilation grid when cleaning.

Use suitable materials for cleaning such as a soft brush, a
vacuum cleaner or compressed air.
CAUTION!
Compressors and pressure lines reach temperatures of approxi-
mately 75 degrees
Burns

Switch off the device and disconnect from the main power
supply.

Set the main switch and battery switch to the [O] position.

Allow device parts and accessories to reach room tem-
perature before touching.
V1 Mobifreeze 60 / 93