Lauda LRZ 920 Operation Manual Download Page 5

1.5 

Copyright

This operating manual was written in German, checked and approved. If

the content of other language editions deviates from the German edition,

the information in the German edition shall take precedence. If you notice

any discrepancies in the content, please contact LAUDA Service, see

Ä

 Chapter 1.6 “Contact LAUDA” on page 5.

Company and product names mentioned in the operating manual are usually

registered trademarks of the respective companies and are therefore subject

to brand and patent protection. Some of the images used may also show

accessories that are not included in the delivery.
All rights reserved, including those relating to technical modifications and

translations. This operating manual or parts thereof may not be modified,

translated or used in any other capacity without the written consent of

LAUDA. Violation of this may obligate the violator to the payment of dam-

ages. Other claims reserved.

1.6 

Contact LAUDA

Contact the LAUDA Service department in the following cases:

Troubleshooting

Technical questions

Ordering accessories and spare parts

Please contact our sales department for questions relating to your specific

application.
Contact information
LAUDA Service
Phone: +49 (0)9343 503-350
Fax: +49 (0)9343 503-283
Email: [email protected]

V1

Interface module LRZ 920

5 / 20

Summary of Contents for LRZ 920

























Reviews: