Lauda LOOP 100, Operation Manual

Page: 6 / 44

The following are considered cases of foreseeable misuse:

Operating the device without heat transfer liquid

Operating the device with an incorrect, flammable heat transfer liquid

Incorrect connection of hoses.
1.4 EMC requirements
Table 1: Classification in accordance with EMC requirements
Device Immunity requirements Emissions class Customer power supply
LOOP
Table 2 (Industrial) in accord-
ance with EN 61326-1
Emissions Class B in accord-
ance with CISPR 11
Worldwide
No limitation
"This equipment has been tested and found to comply with the limits for
Class A digital device, pursuant to Part 15 of the FCC (Federal Communica-
tion Commission) Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the
interference at his own expense."
“This Class A digital apparatus complies with Canadian ICES-003” (ICES =
Interference Causing Equipment Standards).
« Cet appareil numérique de la classe A est conforme à la norme NMB-003
du Canada ».
1.5 Prohibition of modifications to the device
Any technical modification of the device by the user is prohibited. Any
damage resulting from unauthorized modification is not covered by customer
service or the product warranty. Service work may only be performed by the
LAUDA Service department or a service partner authorized by LAUDA.
1.6 Materials
All parts that come into contact with heat transfer liquid are manufactured
from high-quality materials adapted to withstand the operating temperature.
Stainless steel, copper, silicone (hoses) and premium-quality heat-resistant
plastics are used.
Instructions for Class A digital device, USA
Instructions for Class A digital device,
Canada
6 / 41 LOOP V3