Lauda L 100, Operating Instructions Manual

Page: 37 / 48

6.3 Check the heat transfer liquid
Contaminated heat transfer liquid must be replaced. Continued use
of the heat transfer liquid is only permitted following successful
testing.
The heat transfer liquid must be tested as outlined in DIN 51529.
6.4 Cleaning the device
WARNING!
Risk of cleaning agent entering the device
Electric shock
 Only use a slightly damp cloth to clean the device.
Note the following instructions:
 Only use water and detergent to clean the device. Do not use
acetone or solvent as these substances will permanently
damage the plastic surfaces.
 Ensure that the device is decontaminated after coming into
contact with hazardous materials.
 It is forbidden to use decontaminants or cleaning agents that
may react with parts of the device or materials contained in
those parts and potentially pose a hazard .
 If you are unsure whether decontaminants or cleaning agents
are compatible with parts of the device or the materials con-
tained in those parts, please contact LAUDA Service Tem-
perature control devices.
Maintenance
LOOP 37