Platform Manager
Development Kit
This document provides a brief introduction and instructions to install and run the Platform
Manager™ Development Kit on Windows 7/Vista/XP. Please refer to the complete
documentation at www.latticesemi.com/ptmdevkit for more information.
Check Kit Contents
The Platform Manager Development Kit contains the following items:
• Platform Manager Evaluation Board pre-loaded with Platform Manager Demo
• USB connector cable
• 5V DC wall adapter power supply
• QuickSTART Guide
Static electricity can shorten the lifespan of electronic components. Please handle the
kit components carefully.
Power the Platform Manager Evaluation Board
Power the board by connecting the 5V wall adapter plug to the evaluation board.
Running the pre-loaded demos does not require connecting the provided USB cable
to a PC. The cable is required to modify the pre-loaded demo or to load additional IP
cores and reference designs.
5V Wall
Adapter
Plug
SW10
SW9
LCD
Display
DIP SW2
JTAG Config.
LEDs
D3-D6
D13, 15, 19-20
JTAG
USB
Connect
Push-button
PB_B_SW2
Push-button
PB_A_SW1
LEDs
D21-D24
Slide Pot
R19
Slide Pot
R20
Prototyping
Area
Push-
button
1-4
1-4
S1
J8
LDO
2.5V
J7
DC-DC
1.2V
The latest USB drivers can be downloaded in a ZIP file from www.latticesemi.com/
ptmdevkit. Complete documentation, including the Platform Manager Development Kit
User’s Guide is available from the same location.
In the following steps, the evaluation board will be powered and made ready to run the
preloaded demonstrations.
