Himax HM01B0 UPduino Shield
Additional Terms and Conditions Applicable to Lattice Programming and Development Hardware
Lattice device programmers, programming cables, socket adapters, and other hardware sold for use in conjunction with Lattice
software (“Programming Hardware”) and Lattice evaluation boards and development kits sold for use in conjunction with
evaluating Lattice products (“Development Hardware”) are designed and intended for use solely with semiconductor components
manufactured by Lattice Semiconductor Corporation. Programming and Development Hardware is warranted to meet Lattice
specifications only for a period of ninety (90) days; in all other respects the terms and conditions of sale of Programming and
Development Hardware shall be Lattice’s standard terms and conditions set forth in Lattice’s Sales Order Acknowledgment.
Additionally, Lattice specifications for Programming and Development Hardware limit their use to low-volume engineering
applications only, and not for volume production use. The warranty for Programming and Development Hardware will not apply to
any Programming or Development Hardware used in production, used with worn or improperly installed hardware, or used with
incompatible systems or components.
Technical Support
Copyright © 2018 Lattice Semiconductor Corporation. Lattice Semiconductor, L (stylized) Lattice Semiconductor Corp., Lattice
(design), Lattice Diamond and Radiant are either registered trademarks or trademarks of Lattice Semiconductor Corporation in
the United States and/or other countries. Other product names used in this publication are for identification purposes only and
may be trademarks of their respective companies.
QS046
November 2018
5
4
Doing more with the Himax HM01B0 Shield Board
Check the Lattice website at
to download the full User’s
Guide, additional demonstrations and other resources.
Powering the Board & Observing the Demo Program
Connect the micro-USB cable to the board to provide power on the board. Upon boot
up, the Human Presence demonstration will be loaded from SPI Flash to iCE40UP and
begin running. When a human is detected in a region of the camera’s field of view, the
corresponding LED lights. This is summarized below:
LED POSITION
TOP TO BOTTOM
CAMERA REGION
INDICATION
LED 1
Upper Left
LED 2
Upper Right
LED 3
Lower Left
LED 4
Lower Right
LED 5
Center Zoom
LED 6
Full Image