CrossLink-NX PCIe Bridge Board Basic Demo
User Guide
© 2021 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
16
FPGA-UG-02145-1.0
Figure 3.14. Select Startup Settings
7.
Press Enter to restart.
Figure 3.15. Restarting Windows
8.
After restarting, select Option 7 to disable driver signature verification.
3.2.1.3.
Driver Installation
There are two procedures to install the device driver:
Install manually
Install through user interface installer
Installing Basic Demo Device Driver Manually
The drivers for the Basic Demo can be found in the PCIeBasicDemo > Demonstration > Windows10 > Driver folder.
To install the Basic Demo device driver manually:
1.
Open Device Manager, which shows the connected PCIe devices, as shown in
Note: If the Device Manager does not show the connected PCIe device, see the
