Certus-NX Versa Evaluation Board Demo
User Guide
© 2021 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
16
FPGA-UG-02133-1.1
4.
Double-click under Operation to open the Device Properties dialog box.
Figure 3.11. Device Properties
5.
Enter the settings as shown in
Access mode: SPI Flash Background Programming
Operation: SPI Flash Erase, Program, Verify”
Programming File – LFD2NX40_PCIe_Basic_Demo_impl_1.bit
Family – SPI Serial Flash
Vendor – Micron
Device – SPI-N25Q128A”
Package – 8-pin SO8
6.
All other settings are acceptable as default. Click OK.
7.
Click the Programming button highlighted in
to start programming.
Figure 3.12. Programming Button
8.
When programming is successfully completed, the output console shows the status as Operation Successful.
9.
Remove the 12 V power adaptor.
10.
Reconnect the 12 V power adapter. The D29 Done LED glows, indicating successful booting of FPGA from SPI flash.
