Certus-NX Versa Evaluation Board Demo
User Guide
© 2021 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
FPGA-UG-02133-1.1
9
3.2.
Software Setup
This section provides the procedure for installing software onto both your host machine and the Certus-NX Versa
Evaluation Board. The Lattice Radiant Programmer is used to program a .bit file to the onboard memory. You can
configure how your host PC interacts with PCIe endpoints and install the necessary drivers using the Lattice Setup.exe
tool for the Certus-NX Windows/Linux Software.
3.2.1.
Installing the Drivers on the Host Machine
To install the drivers on the host machine:
1.
Go to the following path within the demo: <kit-location>\Demonstration\Windows10\Application\setup.exe.
2.
The InstallShield Wizard for Certus-NX Basic Demo welcome screen opens. Click Next.
Figure 3.1. Welcome Screen
