manualshive.com logo in svg

Lattice Semiconductor OpenLDI/FPD-LINK/LVDS, User Manual, Page: 39 / 45

Share
Download
Lattice Semiconductor OpenLDI/FPD-LINK/LVDS User Manual Download Page 39

 

OpenLDI/FPD-LINK/LVDS Receiver Interface IP 

 

User Guide 

 

© 2017-2019 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at 

www.latticesemi.com/legal

.  

All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. 

FPGA-IPUG-02021-1.1 

 

39 

Figure 5.8

 shows an example simulation of one Rx channel configuration. 

 

Figure 5.8. One Rx Channel Configuration 

5.8.

 

Instantiating the IP 

The core modules of the OpenLDI/FPD-LINK/LVDS Receiver Interface IP are synthesized and provided in NGO format 
with black box Verilog source files for synthesis. A Verilog source file named <instance_name>_fpd_link_rx.v 
instantiates the black box of core modules. The top-level file <instance_name>.v instantiates 
<instance_name>_fpd_link_rx.v and PLL wrapper.  

A Verilog instance template <instance_name>_inst.v or VHDL instance template <instance_name>_inst.vhd is also 
provided as a guide if the design is to be included in another top level module. 

You do not need to instantiate the IP instances one by one manually. The top-level file and the other Verilog source 
files are provided in \<project_dir>. These files are refreshed each time the IP is regenerated. 

5.9.

 

Synthesizing and Implementing the IP 

In Clarity Designer, the Clarity Designer project file (.sbx) is added to Lattice Diamond as a source file after all IPs are 
generated. Note that default Diamond strategy (.sty) and default Diamond preference file (.lpf) are used. When using 
the .sbx approach, import the recommended strategy from 
\<project_dir>\fpdlinkrx_eval\<instance_name>\impl\lifmd\lse or 
\<project_dir>\fpdlinkrx_eval\<instance_name>\impl\lifmd\synplify directories and set them as active strategy. A 
sample preference file (.lpf) is also included in the directory. All required files are invoked automatically. You can 
directly synthesize, map and place/par the design in the Diamond design environment after the cores are generated. 

Push-button implementation of this top-level design with either Synplify or Lattice Synthesis Engine is supported via 
the Diamond project files <instance_name>_top.ldf which is located in 
\<project_dir>\fpdlinkrx_eval\<instance_name>\impl\lifmd\<synthesis_tool>\ directory. 

To use the pre-built Diamond project files: 

1.

 

Choose File > Open > Project. 

2.

 

In the Open Project dialog box browse to 
\<project_dir>\fpdlinkrx_eval\<instance_name>\impl\lifmd\<synthesis_tool>\. 

3.

 

Select and open <instance_name>_top.ldf. At this point, all of the files needed to support top-level synthesis and 
implementation are imported to the project. 

4.

 

Select the Process tab in the left-hand user interface window. 

5.

 

Implement the complete design via the standard Diamond user interface flow. 

Summary of Contents for OpenLDI/FPD-LINK/LVDS














































Reviews:

No comments