18
LatticeEC Advanced Evaluation Board –
Lattice Semiconductor
Revision C User’s Guide
7.
Insert a new device into the chain (Edit->Add Device).
8.
In the resulting Device Information dialog, shown in Figure 4, press the ‘Select’ button.
Figure 4. Device Selector Dialog
9.
Use the pull-down menu to in the ‘Device Family’ field to choose the device ‘FGPA Loader’. Press OK. The
resulting dialog should resemble Figure 5.
Figure 5. FPGA Loader Setup
10. Choose the ‘Flash Device’ page and press the ‘Select’ button.
11. Select the ‘SPI Serial Flash’ family and choose the device SPI-M25P80, as shown in Figure 6. Press OK.
Note: It may be necessary to select an alternate SPI3 Flash device, as the part number is subject to change.