6
iCE40LM4K Sensor Evaluation Kit
Figure 3 shows the connections between the Sensor Fusion Board and the Intrinsyc Dragon Board.
Figure 3. Connecting Sensor Fusion Board to Intrinsyc Dragon Board
5V fly wire (supplied)
to be connected between
+5V on the Intrinsyc Adapter board
(plugged in) and the C1300 right side
terminal (soldered) on the Intrinsyc
Dragon Board
Jumper to be set
at 3.3V
Marked end of cable connected to
pin1 of the Intrinsyc Adapter board
Marked end of smaller connector,
connected to pin1 of J21 on the
Sensor Fusion Board
Marked end of larger connector,
connected to pin1 of J13 on the
Sensor Fusion Board
